Moulds, fixtures and suppliers set up for the product.
Units are built on the line, consistently, at volume.
Every batch is checked against the approved sample.
Finished units are packed and ready for delivery.
Manufacturing & Production
A product design that a factory can build consistently.
We prepare your design for production, choose and manage suppliers, and stay involved until finished units match the approved samples.
What you get
01Designs ready to produceParts adjusted so they can be made reliably, at volume and at a fair cost.
02Suitable suppliersFactories and part makers selected for capability, quality and fit.
03Controlled first runsEarly production checked closely so problems are caught before shipping.
How we deliver
Four stages, each ending with something you can see and review before the next one starts.
01
Review
We check the design for anything likely to cause cost, delay or defects.
02
Prepare
We revise parts, finalise drawings and build the costed parts list.
03
Source
We shortlist suppliers, compare quotes and support tooling and samples.
04
Produce
We oversee trial and early production runs against agreed quality checks.
What we buildOur manufacturing capabilities
Design for manufacture (DFM)
Adjusting parts so they are easier and cheaper to make without losing quality.
Discuss thisDesign for assembly
Fewer parts and simpler steps so units go together quickly and correctly.
Discuss thisTooling support
Working with toolmakers on the moulds and dies used to form parts in volume.
Discuss thisSupplier sourcing
Finding and assessing factories and part suppliers that suit your product.
Discuss thisBill of materials
A complete, costed list of every part, with alternatives where supply is tight.
Discuss thisQuality planning
Inspection points, acceptance criteria and test steps agreed with the factory.
Discuss thisTrial production
A small first run to confirm the process before full volume begins.
Discuss thisProduction support
Help resolving yield problems, part changes and supplier issues as they arise.
Discuss thisFabSky
Each client mission needs a drone airframe built around its own payload.
Selected work · FabSkyAnimated illustration
Robotics and drone systems: custom drone design and fabrication
What we built
- Mechanical design around the payload and mission
- Stress and durability checks
- Precision fabrication by CNC machining, 3D printing and laser cutting
Delivered by Hoki and its engineering partners. Product and client names belong to their owners.
Discuss a similar projectSelected projects in this area
CNC and precision machined componentsManufacturing support
Modular sheet metal systemIndustrial fabrication
CNC billet swingarmAutomotive engineering
Sheet metal IoT enclosureIndustrial electronics
The technology we build with
We pick tools around your existing systems, your team and how the product will be run.
Engineering and drawings
SolidWorksFusion 360AutoCADCreoMoldflow
Parts and production data
OdooSAP Business OneArena PLMOctopartMicrosoft Excel
Quality tools
Calipers and gaugesCoordinate measuring machinesMinitabStatistical process control
Where this applies
The same engineering, shaped by the rules and realities of each sector.
Manufacturing
Cost reduction and production transfer for existing product lines.
Retail and e-commerce
Sourcing and quality control for own-brand products made overseas.
Healthcare
Production planning for devices where traceability and records matter.
Energy and utilities
Scaling field equipment from small batches to steady production.
Media and broadcast
Low-volume production of specialist equipment and accessories.
Logistics and supply chain
Producing tracking devices and handling equipment at steady volume.
Frequently asked questions
What does DFM mean in practice?
DFM stands for design for manufacture. It means adjusting a design so a factory can make it easily, consistently and at a sensible cost, for example by changing wall thickness or reducing the number of parts.
How is your fee agreed?
It depends on the product and how much of the production process you want us to handle. After reviewing your design we propose a scope, which can range from a one-off review to ongoing production support.
Can you work with our existing manufacturer?
Yes. We can work directly with your current factory on design changes and quality checks, or help you find additional suppliers if needed.
Do we buy parts through you or directly?
That is agreed case by case. Many clients prefer to contract suppliers directly while we manage the technical side, which keeps costs and relationships transparent.
Another question? Email hello@hoki.co
Get your product ready for production
Share your design and expected volumes. We will tell you what it needs before a factory takes it on.
Start a project
Tell us what you want to build.
Share a few details about your manufacturing project. We will reply with questions and a suggested next step.
- What problem you want solved
- What you already have in place
- Any timing or budget you are working to
Start a project
Tell us what you want to build
A few details help us bring the right people to the first call.
Thank you.
Your enquiry is with our team. Here is what happens next.
1We read your enquiry and bring in the people best placed to help.
2We reply by email to arrange a call at a time that suits you.
3On the call, we agree a clear next step, with scope and cost.
More in Product Development
Product Strategy & Design
From concept and requirements to product roadmap
OpenHardware Development
Electronics, devices and integrated hardware
OpenConsumer Product Development
Design and development of market-ready physical products
OpenIndustrial Design
Form, function, materials and product experience
OpenPrototyping & Validation
Proof-of-concept, functional prototypes and testing
OpenEmbedded Systems & IoT
Firmware, sensors, connectivity and smart devices
OpenProduct Launch & Scale
From production readiness to commercial rollout
Open